FoxESS Community - Owners & Installers Forum

Where to place CT clamp to record solar output.
I have a 5kw AC1 inverter with Enphase microinverter on each panel connect to an Enphase Gateway.
I am recording grid/battery info. but not solar, I have wired the CT clamp into conns 7/8 0n the inverter.
Any help much appreciated.

Can you have 8 HV2600 V2 batteries on 1ph with a 5kw hybrid inverter

FoxESS anybody know of an installer in the Bristol area conversant with the FoxEss system.

Many thanks

dellpirch

Hi Callum

Many thanks for your reply, I confess that I am lost as to how to proceed.
Do I go into the battery settings on the inverter and set the max S.O.C at say 35%, it is now set at 96%, or do I go into the on-grid setting and set the power limit to???

As you can tell I am a newbie out of my ...

Calum
Many thanks for your reply.
You were right the "self use " mode had not been selected, that has now been corrected.
I do not believe my original post was very clear, what I was trying to say was I assumed that most if not all of my electricity after the night time charge period would come from ...

I am with Octopus, tariff "GO" and have 4 Fox HV2600 V2 battery bank.
Whilst my batteries never seem to go below 50% SOC I am still being charged by Octopus for all input after the 4 hour night time period.
What settings have I got wrong, or not input because I am sure that all my electricity after ...

A big thank you to Will for setting up the forum, should have looked before would probably saved myself some hassle!

I have a 32 Solar World panel installation from 2014, orientation 25` from South incl.20`, shading 0.95%.
Each panel is fitted with an Enphase microinverter connected to an Envoy ...