Just wondering when will Fox introduce real-time or near real time updates?
Monitoring system performance with VPP is very difficult with the current 5 min delay
It's been suggested that it will arrive "soon" but I wouldn't hold your breath.
Easier option might be to look at Home Assistant / RS485 integration. It sounds complex but it's really not that bad to set up and you can get 5-10s interval data.
Easier option might be to look at Home Assistant / RS485 integration. It sounds complex but it's really not that bad to set up and you can get 5-10s interval data.
Site Admin
If you have a H1-Gen2 WL or KH-WL you can ask Fox Support to install the beta software which reduces the poll rate to around 5-10 seconds from 300 seconds (5minutes). Note, currently only supported on the WL version with the integrated data logger but expected to be rolled out to all smart WiLAN and Smart dataloggers in the near future. Unlikely to be suppored on older classic first gen H1's due to hardware limitations.
Community Admin / FoxESS Elite Professional
Did I help you? Feel free to leave me a tip
Book a zoom meeting for remote consultancy or help
Switch to Octopus and earn £50
Subscribe to my YouTube channel
2 x KH Hybird Inverters (Parallel Mode)
1 x H1 Gen1 (Solar Mode)
1 x H1 Gen2 WL (Testing, Modbus and API development)
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
2 x EV's (Tesla & Mercedes)
Heatpump & Low Carbon Housebuild
Did I help you? Feel free to leave me a tip Book a zoom meeting for remote consultancy or help Switch to Octopus and earn £50 Subscribe to my YouTube channel2 x KH Hybird Inverters (Parallel Mode)
1 x H1 Gen1 (Solar Mode)
1 x H1 Gen2 WL (Testing, Modbus and API development)
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
2 x EV's (Tesla & Mercedes)
Heatpump & Low Carbon Housebuild