New installation last week.
I may have missed something very obvious here.
On the Android app Foxcloud2.0 just installed - version 2.1 (current according to play store) I don't see a mode scheduler?
On laptop there's a very simple two charge period times option, but if you choose the option for "version 2" on there you get a full mode scheduler.
I've not tried it yet as we're still waiting for the paperwork to get off a standard tariff, so it makes no difference anyway
How do I get this on the app?
Site Admin
I made this video to help, don't use the simply two slot settings as these are being phased out. Make sure you use the mode scheduler.
Community Admin / FoxESS Elite Professional
Did I help you? Feel free to leave me a tip
Book a zoom meeting for remote consultancy or help
Switch to Octopus and earn £50
Subscribe to my YouTube channel
2 x KH Hybird Inverters (Parallel Mode)
1 x H1 Gen1 (Solar Mode)
1 x H1 Gen2 WL (Testing, Modbus and API development)
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
2 x EV's (Tesla & Mercedes)
Heatpump & Low Carbon Housebuild
Did I help you? Feel free to leave me a tip Book a zoom meeting for remote consultancy or help Switch to Octopus and earn £50 Subscribe to my YouTube channel2 x KH Hybird Inverters (Parallel Mode)
1 x H1 Gen1 (Solar Mode)
1 x H1 Gen2 WL (Testing, Modbus and API development)
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
2 x EV's (Tesla & Mercedes)
Heatpump & Low Carbon Housebuild
"Work Mode" on the front screen. Got it, thanks.
Will work through it once I've got the paperwork through for export tariff setup
Will work through it once I've got the paperwork through for export tariff setup