The inverter I installed always reaches a value of, for example, 4kW, and then it resets to zero and repeats the cycle in about 20 seconds.
Please see video attachment http://sokdoo.com/2025-03-11 u 09.06.03.mp4
Site Admin
Do you have some kind of export limit set or are you overloading the mppt?
Community Admin / FoxESS Elite Professional
Buy me a coffee or Book a zoom meeting for remote consultancy
FoxESS Tri Inverter Installation
2 x KH & 1 x H1
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
Dual Tesla Household
Heatpump & Low Carbon Housebuild
Buy me a coffee or Book a zoom meeting for remote consultancy
FoxESS Tri Inverter Installation
2 x KH & 1 x H1
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
Dual Tesla Household
Heatpump & Low Carbon Housebuild
No export limit.
I have 16x410W (ulica solar) on one string.
I have 16x410W (ulica solar) on one string.
Desconectar todos los cables durante 5 o 10 minutos y vuelves a conectar y encender a ver si se soluciona
No resolving problem with disconnect all cables and reconnect.