We installed a new system almost 2 months ago.
The EP11 started up with an error saying pre-charge was not successful.
Fox support asked me to unplug all cables and plug it back in.
The battery lights fired up this time but as soon as I switched on the external DC contactor switch between the battery and inverter it went dead.
I am pretty sure I heard a sound like a circuit breaker coming from the battery when this happened.
Does these batteries have internal circuit breakers or internal fuses?
Site Admin
Just seen this post, any update on what happened or what the resolution was?
Community Admin / FoxESS Elite Professional
Did I help you? Feel free to leave me a tip
Book a zoom meeting for remote consultancy or help
Switch to Octopus and earn £50
Subscribe to my YouTube channel
2 x KH Hybird Inverters (Parallel Mode)
1 x H1 Gen1 (Solar Mode)
1 x H1 Gen2 WL (Testing, Modbus and API development)
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
2 x EV's (Tesla & Mercedes)
Heatpump & Low Carbon Housebuild
Did I help you? Feel free to leave me a tip Book a zoom meeting for remote consultancy or help Switch to Octopus and earn £50 Subscribe to my YouTube channel2 x KH Hybird Inverters (Parallel Mode)
1 x H1 Gen1 (Solar Mode)
1 x H1 Gen2 WL (Testing, Modbus and API development)
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
2 x EV's (Tesla & Mercedes)
Heatpump & Low Carbon Housebuild